Tropitone Fire Pit Troubleshooting

If you aren t sure fill the tank or exchange it for a full one.

Tropitone fire pit troubleshooting.

To work correctly the fire pit must have a constant supply of air. This range of output provides the user with versatility for variations in outdoor temperature and activities. To remove the terminal cap or replace the battery take a flathead screwdriver and insert the tip into the slot at the bottom of the case. The main burner should be inspected thoroughly to insure there is no blockage as well as no damage before lighting if the fire pit has been sitting idle for an extended period of time.

The spark used to ignite your fire pit comes from a 9 volt battery located in this housing. Gas fire pit troubleshooting having issues with your fire pit. Use a nail to clean out holes and air intake openings. To test the air flow leave the loading door open and check whether the fire burns more brightly.

A common problem with these fire pits is that they won t stay lit unless you hold the knob i found the fixwant this fire pit. To replace the battery unscrew the round cap by turning counter clockwise left and pull out the battery. If the air holes or air intake vent have been plugged or don t exist at all you may have a hard time getting a fire to burn. The versatile design allows for the combination of one of the tropitone brand s four most popular.

Install new battery and tighten cap completely by turning clockwise right to insure a good connection. Mounted on the fire pit side wall as shown. Just like a gas oven or gas heater are gas appliances a fire pit is also a gas appliance and therefore proper precautions must be taken in order to ensure safety during installation and use always be sure to follow the guidelines specified by the manufacturer in the installation. Fire pit pilot won t light the first step in the troubleshooting procedure is to ensure that the propane tank is not empty.

The burner system produces a wide range of heat output peaking at 90 000 btus.