Top Rope Belay Bar

Feed the rope through your belay device according to the instructions that came with the device and attach the belay device to a locking carabiner.

Top rope belay bar.

The rope rides through the ring. Stainless steel or galvanized steel bar. Call out on belay to ensure the belayer is ready with the rope in case you fall. It offers a belay station for both top rope and lead climbing as there are two separate placements for the top rope and the lead rope a smooth cylinder for the top rope and the regular two facing locks carabiners for lead climbing.

Attach the locking carabiner to your harness. The walltopia belay bar is a device that is mounted on top of the climbing route. Keep your focus on the leader using this versatile hms for all your belaying needs. 77 grams strength.

If you are using the atc or atc xp be sure to clip the locking carabiner through the loop of the device and the rope. Top rope belay anchor. As with most belay carabiners it is hms or pear shaped which offers a wide gate opening to easily set up your belay device and rope. Climbing rope is secured by running through both rings or around the bar one and a half times.

Located just above the top of the wall this anchor system consists of two fixed ring type anchors or a welded bar mounted to a plate extending 4 to 6 inches out from the face of the climbing surface. The climber rope side of the bight which goes up to the anchor and back down to the climber should always be on the top side of your belay device. Attach a locking carabiner which must pass through the bight and belay device cable as well as your harness belay loop. 23kn ce and uiaa certified.

The rope rides smoothly over the bar steel rail with pulley blocks on wheels and a ring. The new hot forged parabiner belay hms with belay bar prevents unwanted cross loading while belaying or rappelling. Belay bar and belay rail quote.