Top Rope Belay

In this video julie ellison climbing maga.

Top rope belay.

When a climber falls having a solid top rope anchor is literally a matter of life and death. Top rope climbing or top roping is a style in climbing in which the climber is securely attached to a rope which then passes up through an anchor system at the top of the climb and down to a belayer at the foot of the climb. Toproping offers the rock climbing experience with all the rewards but minimal risks. Attach a locking carabiner which must pass through the bight and belay device cable as well as your harness belay loop.

Top rope climbing is all about having fun being outside and climbing rock faces. Top rope belay certification test rules and conditions for belay testing all climbers requesting to belay in the vertical rock facility must have prior climbing experience and successfully pass the vr belay safety test. An anchor refers to the whole system the anchor points the protection gear runners carabiners and climbing rope. Each of them has its pros and cons.

As the belayer you provide a brake on the rope to prevent the climber from falling to the ground. Toproping simply put is climbing a rock face with the climbing rope always anchored above you. The climber rope side of the bight which goes up to the anchor and back down to the climber should always be on the top side of your belay device. A new climber typically starts with a style of climbing called toproping where the rope runs from the belayer s device and harness up through the anchor at the top of the climb and back down to the climber s harness.

As the climber ascends the wall the belayer pulls the rope through a belay device shortening the length of rope between the two. There are many ways to set up a top rope anchor and this article covers 7 of them. In order to belay in the vr facility you must be 13 years or older or receive approval from vr management. A belay device helps you provide this brake by applying friction to the rope.